Foolproof Chocolate Fudge - An Easy Chocolate Fudge Recipe (2024)

FAQs

What is the secret to perfect fudge? ›

You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).

Evaporated milk doesn't have sugar added. The sweetened condended milk is needed as no extra sugar is added to the fudge. If evaporated milk were used then the fudge would not be sweet enough and also would still be too soft unless the fudge is frozen.

While you ultimately want crystals to form, it's important that they don't form too early. The key to successful, nongrainy fudge is in the cooling, not the cooking.

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

Grainy Fudge

To avoid this issue, swirl the pan instead of stirring it with a spoon. You can use a wet pastry brush to wipe down any sugar that sticks to the sides of the pot.

For the most part, if you find yourself without condensed milk on hand, you can substitute an equal amount of evaporated milk. The consistency will be the same, but since evaporated milk is unsweetened, you'll need to add sweetener to match the recipe's intended flavor profile or to suit your personal preference.

The most common culprit behind unset fudge is inaccurate temperature control. If the sugar mixture hasn't reached the correct temperature, your fudge won't set. Ensure you use a reliable candy thermometer and follow temperature guidelines meticulously to achieve the desired consistency.

Sweetened condensed milk is high in calories and unsuitable for people with cow's milk protein allergy or lactose intolerance. Its sweet flavor may be off-putting for some and doesn't typically serve as a good substitute for regular milk in recipes.

What happens if you boil fudge too long? ›

If there is too much evaporation, when the cooking time is too long, there will not be enough water left in the fudge and it will be too hard.

Allow the fudge mixture to rest until the temperature registers between 150°-160°. Once the desired temperature is reached, beat the ever-loving stuffing out of the fudge. Two to three minutes of hardcore mixing (by hand). This is where you earn the right to eat half of the batch.

How can you fix soft fudge? Put it in a microwave safe bowl that is large enough that it won't boil over. Reheat it to the boiling point and cook for about 3 more minutes. Then you can beat some powdered sugar into it if this doesn't make it set.

Points to remember

You know it's ready when a small amount of the mixture dropped into a glass of cold water sets into a soft ball that you can lift out with a teaspoon and pinch between your fingers. Turn off the heat and keep stirring for 5 minutes or until the mix starts to thicken a little.

However, homemade fudge doesn't always set up into a semi-firm, melt-in-your-mouth confection. If your fudge doesn't firm up after a few hours, you either have too high an amount of liquid to sugar, or your mixture hasn't reached the soft-ball stage. Using a candy thermometer can help home cooks avoid this problem.

Avoid Stirring Once the Mixture Comes to a Simmer

Another key part of a successful fudge texture is when you stir the mixture. Stirring the sugar and milk during the initial stages of cooking allows the sugar to dissolve. However, once the mixture comes to a boil, it's time to put the spoon down.

If there is too much evaporation, when the cooking time is too long, there will not be enough water left in the fudge and it will be too hard. Conversely, if the cooking time is too brief and there is not enough evaporation, too much water will remain and the fudge will be too soft.

Cream of tartar is used in caramel sauces and fudge to help prevent the sugar from crystallizing while cooking. It also prevents cooling sugars from forming brittle crystals, this is why it's the secret ingredient in snickerdoodles!

Pour the mixture over the chocolate, being sure to shake, not scrape, the mixture from the pot. Set aside to cool for 10 to 12 minutes. (This prevents a grainy consistency.) Using the clean wooden spoon or a standing mixer on low speed, stir or beat the mixture until the chocolate is completely melted and incorporated.